Chemlube Limited https://chemlube.net The Lubricant You Can Trust Fri, 30 Jan 2015 10:39:59 +0000 en-US hourly 1 https://wordpress.org/?v=4.4.25 Get Ready For MAK 4T NXT https://chemlube.net/mak-4t-nxt-2/ https://chemlube.net/mak-4t-nxt-2/#respond Thu, 11 Sep 2014 20:17:44 +0000 http://chemlube.net/?p=232 This is the Next upcoming Lubricant from MAK in Bangladesh. It will be available within next month . We are the only distributor of this product.

]]> https://chemlube.net/mak-4t-nxt-2/feed/ 0 MAK DIAMOND https://chemlube.net/mak-dimond/ https://chemlube.net/mak-dimond/#respond Tue, 09 Sep 2014 11:25:47 +0000 http://chemlube.net/?p=166 SAE Grade: 15W-40

Description

It is premium quality multigrade diesel engine oil formulated with superior quality base oil and high shear stable Viscosity Index Improver. It is specially formulated to address the most arduous operating conditions of Indirect Injection (IDI) engines.

Applications

It is suitable for all types of diesel passenger cars & commercial vehicles, earthmoving machinery, construction industry & power units for constant high speed or stop-start service under severe conditions. It is specially recommended for use in vehicles meeting EURO I & II norms.
Field Trials conducted on TELCO / Ashok Leyland vehicles established a drain interval of 24000 kms.

Performance Benefits

  • Provides excellent lubrication The unique detergent-dispersant inhibitor used in this oil helps in keeping the engine clean, preventing premature oil thickening
  • Good TBN retention power thereby offering excellent protection against corrosive wear
  • This oil is suitable for use in all seasons and helps in reducing oil consumption

Performance Level

  • API CF-4/SJ
  • MB 228.1
  • IS 13656:2002 Type EDL5 & EPL2
  • MIL-L-2104E
 Characteristics IS 1448 Typical Figures
20W-40
Appearance — Clear & Bright
Colour, Visual Observation — Brown
Density @15°C, gm/ml P:16 0.8788
K.V at 100° C, cSt P:25 14.40
Copper Corrosion @ 100° C for 3 hrs P:15 1a
Flash Point, (COC), °C P:69 226
Viscosity Index P:56 137
Pour Point, °C P:10 -27
Foaming Tendency / Stability:
Qty. of foam in ml
a) Sequence I
b) Sequence II
c) Sequence III		 P:67 Nil / Nil
10 / Nil
Nil / Nil

Health and Safety

This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.

 

]]> https://chemlube.net/mak-dimond/feed/ 0 MAK MULTIGRADE https://chemlube.net/mak-multigrade/ https://chemlube.net/mak-multigrade/#respond Tue, 09 Sep 2014 10:58:17 +0000 http://chemlube.net/?p=160  

SAE Grade: 20W-40 & 20W50

Description

This is superior quality multigrade oil blended with superior quality high Viscosity Index base oils and contains well balanced group of additives, to provide high detergency, dispersancy and anti oxidation characteristics.

Applications

It is recommended for use in Heavy Duty Commercial Vehicles, Light Commercial Vehicles & Multi-utility vehicles fitted with high speed naturally aspirated or Turbo charged diesel engines operating at low speed and high torque conditions that are prevalent in prolonged city stop & go driving conditions and also in hilly regions.

Performance Benefits

  • Better resistance against wear of moving engine parts at all operating conditions
  • Excellent thermal and oxidation stability & less formation of oxidation related deposits
  • Protects engine components against rust and corrosion due to built-in alkaline reserves
  • Ensures smooth running of engine in all climatic conditions

 

 

Performance Level

  • API CF/SF
  • IS 13656:2002 Type EDL2 & EPL2

 

 Characteristics IS 1448 Typical Figures
15W-40
Appearance — Clear & Bright
Colour, Visual Observation — Red
Density @15°C, gm/ml P:16 0.8911
K.V at 100° C, cSt P:25 14.10
Copper Corrosion @ 100° C for 3 hrs P:15 1a
Flash Point, (COC), °C P:69 240
Viscosity Index P:56 113
Pour Point, °C P:10 -24
Foaming Tendency / Stability:
Qty. of foam in ml
a) Sequence I
b) Sequence II
c) Sequence III		 P:67 Nil / Nil
10 / Nil
Nil / Nil

Health and Safety

This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.

 

]]> https://chemlube.net/mak-multigrade/feed/ 0 MAK 4T NXT https://chemlube.net/mak-4t-nxt/ https://chemlube.net/mak-4t-nxt/#respond Tue, 09 Sep 2014 10:53:51 +0000 http://chemlube.net/?p=157 Our newly developed semi synthetic MAK 4T NXT Oil is designed to provide ultimate protection & performance for all new generation motorbikes specially higher capacity engines (125 cc and above). These engines are required to deliver high power & torque and require oil performance reliability under arduous conditions. This oil is designed for bikers who are passionate about their bikes and look forward to an exhilarating riding experience.

Description

Our new 4T Oil provides advanced control with smoother gear changes, better clutch performance, improve pick-up & an enjoyable ride by reducing vibration & noise.

Performance Benefits

Maximum Driving Comfort

  • Enhanced shear stability of the oil helps in better dampening of vibrations & reduces noise at peak engine speed.
  • Optimized friction control for smoother clutch engagement & gear changes performance

 

Maximum Power Realisation

 

  • Field proven semi synthetic technology designed to provide superior lubrication of engine, clutch and gear.
  • Additive technology used promotes quick engine response and increases the power output

 

Long Engine Life

 

  • Unique viscometrics to ensure engine and gear durability without sacrificing on fuel economy.
  • Special formulation to provide outstanding engine cleanliness.

 

Environment Friendly

 

  • Technologically advanced 4-stroke motorcycle engine oil which increases the fuel economy of the bike and reduce oil consumption

Product blended with ultra low sulfur environmental friendly base oil

Performance Level

Meets API SL performance and requirements of JASO-MA2 standards

]]> https://chemlube.net/mak-4t-nxt/feed/ 0 The Future MAK 4T NXT https://chemlube.net/the-future-mak-4t-nxt/ https://chemlube.net/the-future-mak-4t-nxt/#respond Tue, 09 Sep 2014 10:41:55 +0000 http://chemlube.net/?p=154 https://chemlube.net/the-future-mak-4t-nxt/feed/ 0 MAK 4T STALLION https://chemlube.net/mak-4t-plus/ https://chemlube.net/mak-4t-plus/#respond Tue, 09 Sep 2014 10:33:29 +0000 http://chemlube.net/?p=149 SAE Grade: 20W-40 & 20W-50

 

Description

These oils are specially designed keeping in view the high temperature operating conditions encountered in air cooled 4 Stroke 2 Wheeler engines unlike in the case of passenger car engines, which are water cooled. Being Multigrade oils, these are suitable for use in all seasons. This oil provides better oxidation stability.

 

Applications

This oil is designed for high power modern 4-stroke motor cycles. This oils is also suitable for earlier models of 4-stroke motor cycles & scooters.

 

Performance Benefits

  • Possess special frictional propertiesrequired for smooth operation of wet clutches used in 4 stroke 2 wheelers
  • Provide outstanding oxidation stability there by ensuring cleaner engine and extended oil life
  • Good wear protection
  • Minimize engine deposits due to excellent sludge and varnish control

 

Performance Level

  • JASO MA2
  • API SL

 

 

 

 

 Characteristics  IS 1448 Typical Figures
20W-40 20W-50
Appearance —- Clear & Bright Clear & Bright
Colour, Visual Observation —- Brown Brown
Density @15°C, gm/ml P:16 0.8855 0.8896
K.V at 40° C, cSt P:25 14.8 18.5
Viscosity Index P:56 113 123
Flash Point, (COC), °C P:69 240 242
Pour Point, °C P:10 -21 -21
Copper corrosion @ 100°C for 3 hrs. P:15 1a 1a
Foaming Tendency / Stability:
Qty. of foam in ml
a) Sequence I
b) Sequence II
c) Sequence III		 P:67 Nil / Nil
10 / Nil
Nil / Nil		 Nil / Nil
10 / Nil
Nil / Nil

Health and Safety

These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.

 

]]> https://chemlube.net/mak-4t-plus/feed/ 0 MAK ATF-A https://chemlube.net/mak-atf-a/ https://chemlube.net/mak-atf-a/#respond Mon, 08 Sep 2014 06:36:04 +0000 http://chemlube.net/?p=122 Description

This is premium quality automatic transmission oil having low co-efficient of friction, fortified with additives to impart excellent properties.

Applications

It is recommended for Automatic Transmission and Power Steering System of automobiles and Earth moving equipments. It is also recommended for synchromesh manual transmission system of automobiles.

Performance Benefits

  • Excellent thermo-oxidative stability
  • Good seal compatibility properties
  • Low temperature flow characteristics
  • Good anti-wear and anti-corrosion properties
  • Ensures smooth operation with a minimum power loss

Performance Level

  • Type A Suffix A of DEXRON 1 and 1B of General Motors, USA
  • C-2 Specifications of Detroit Diesel Allison Division of General Motors, USA
 Characteristics  IS 1448 Typical Figures
Appearance —- Clear & Bright
Colour, Visual Observation —- Red
Density @15°C P:16 0.8782
K.V at 40° C, cSt P:25 7.5
Copper Corrosion @ 100° C for 3hrs P:15 1a
Flash Point, (COC), ° C P:69 202
Viscosity Index P:56 158
Pour Point, °C P:10 -42

Health and Safety

This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.

]]> https://chemlube.net/mak-atf-a/feed/ 0 Chemlube https://chemlube.net/chemlube/ https://chemlube.net/chemlube/#respond Wed, 13 Aug 2014 08:53:54 +0000 http://chemlube.net/?p=99 MAK  lubricants are in compliance with the international standards in terms of its quality in all the fields e.g. Automotive, Industrial, Marine and some of the Products are ISO approved followed by environmental safety. That’s why Chemlube distributes MAK lubricants in Bangladesh. Chemlube is also committed to provide excellent lubricating oil in all sectors complying with all applicable statutory and regulatory requirements.

]]> https://chemlube.net/chemlube/feed/ 0 About Us https://chemlube.net/about-us-2/ https://chemlube.net/about-us-2/#respond Tue, 12 Aug 2014 12:55:03 +0000 http://chemlube.com:8080/?p=72 Mr. Ishtiaque Abedin along with his father late Dr. Anwarul Abedin founded  Chemlube Ltd, in the year 2004. He is an ambitious and aspiring entrepreneur started  distributing lubricants and in 2004 started distribution of  BPCL’s MAK lubricants throughout  Bangladesh in 2006.

Chemlube has always endeavored to provide value added Products to the market according to customer need. The company reached 10th year anniversary- a decade of reforms .

The board of  directors of the Company including Chairman Mr. Hasanul A  Hasan, Ms. Nadia Abedin and other three directors are equally authorized and  share holders.

]]> https://chemlube.net/about-us-2/feed/ 0